Sample layout

What's in a ValueEdge valuation report

A ValueEdge valuation report states its purpose and the tax or legal provision, the valuation date and whether it is retrospective, the inspection date, the property details, the sales evidence and method used, a single market value, and the signing valuer's name, credentials and independence declaration. This page shows the layout section by section. It is a sample layout, not a real report.

The summary page

Three reports that never look alike

The first page of each report tells you what it is before you read a figure. These are sample layouts for a fictional property.

Estimate · not a valuationSample

Market value estimate

12 Sample Street, Exampleville NSW 2000

Estimated range

$1,180,000 to $1,300,000

Mid estimate $1,240,000 · Confidence: medium

$1,180,000$1,300,000
Purpose
SMSF update between valuations
As at
30 June 2026
Inspection
None
Evidence
6 comparable sales, listed in the report
Prepared by
ValueEdge's data model; property details and sales checked by staff
Standard
Not a valuation under any valuation standard

No valuer has formed an opinion of value.

Sample layout for a fictional property. No real property, value or valuer is shown.
Desktop · no inspectionSample

Desktop valuation (CPV-signed, no inspection)

12 Sample Street, Exampleville NSW 2000

Indicative value

$1,250,000

Indicative value under API Rule 12.2. Not for a CGT cost base or court.

Lowest sale $1,150,000Highest sale $1,330,000
Purpose
SMSF annual reporting
Valuation date
30 June 2026
Inspection
None. The valuer has not seen the property
Evidence
5 comparable sales with adjustments
Signed by
Signing valuer’s name, CPV number and registration appear here
Standard
Not an IVS-compliant valuation

The report states how not inspecting may affect the opinion.

Sample layout for a fictional property. No real property, value or valuer is shown.
Inspected valuationSample

Market valuation

12 Sample Street, Exampleville NSW 2000

Market value

$1,265,000

One million two hundred and sixty-five thousand dollars

Lowest sale $1,150,000Highest sale $1,330,000
Purpose
CGT cost base (s 112-155 ITAA 1997), at the client’s election
Valuation date
Just before 1 July 2027 · retrospective
Inspection
14 August 2027, full internal and external, by the signing valuer
Evidence
5 comparable sales, none after the valuation date; cross-check by land and building rates
Signed by
Signing valuer’s name, CPV number and registration appear here
Standard
Prepared under IVS and API standards

Prior sale reconciled: bought 2015 for $820,000.

Sample layout for a fictional property. No real property, value or valuer is shown.

Side by side

How the three reports differ

Market value estimateDesktop valuation (CPV-signed, no inspection)Inspected valuation
What the figure isA range with a mid estimate and a confidence gradeOne indicative valueOne market value, in figures and words
Who forms itOur data model. Staff check the property details and the sales usedA Certified Practising Valuer, from records and sales dataThe Certified Practising Valuer who inspects the property
InspectionNoneNone. The report says how that may affect the opinionFull internal and external, dated, with photographs
Comparable salesListedListed, with the adjustment made for eachListed, with adjustments and a second method as a cross-check
StandardNot a valuation under any valuation standardIndicative value under API Rule 12.2IVS and API standards
Used forPre-sale checks; SMSF updates between full valuationsSMSF reporting; pre-sale checks. Provides an indicative value under API rules1 July 2027 CGT cost base; larger SMSF holdings
Not suitable forCGT cost base, court or a signed valuationCGT cost base or courtBuilding or pest assessment
Price incl. GST$195$249$550

For accountants and auditors

What a careful reader checks first

The ATO publishes what it expects a market valuation report to contain. These are the points an accountant or SMSF auditor usually looks for, and each has a fixed place in our report.

  1. 01

    Three dates, stated separately

    The valuation date, the inspection date (or "none") and the report date, with a flag when the valuation date is in the past.

  2. 02

    The inspection basis on page one

    Whether anyone inspected, and who. Never left to the assumptions at the back.

  3. 03

    Comparable sales listed

    Each sale with its date, price and the adjustment made, and none dated after the valuation date.

  4. 04

    The prior sale explained

    What the property last sold for, and why the value now differs.

  5. 05

    A second method

    A cross-check on the main method, with its result shown.

  6. 06

    Independence

    The valuer has no interest in the property or the parties, and the fee does not depend on the value.

  7. 07

    Who may rely on it

    The client, and by name the accountant or SMSF auditor if the client asks. No expiry clause on a value fixed to a tax date.

Section by section

The report, section by section

Each row says what the section contains and which part of the ATO's published guidance on market valuation reports it is designed to address. The ATO's guidance lists the content it expects "at a minimum"; this is how our report is laid out against it.

# Report section What it contains ATO expectation it addresses
1 Summary Property, purpose, valuation date, inspection type and date, market value, signing valuer A specific value, the valuation date and the valuer's identity
2 Instructions and purpose Who instructed the valuation, its purpose and the provision it is for (for example, "s 112-155 ITAA 1997, market value just before 1 July 2027"), and who may rely on it Purpose including the tax provision; engagement terms and instructions
3 Scope and limitations Report type (inspected or desktop), what was and wasn't inspected, the information relied on, and limitations Scope and limitations. For a desktop, the API disclosure that it gives an indicative value only
4 Dates The date of value and whether it is retrospective; the inspection date; the issue date The date of the valuation, whether it is retrospective, the inspection date (if applicable) and the issue date
5 Definition of value and standards The definition of market value used and the standards applied (International Valuation Standards; API rules) Definition of value; standards applied
6 Property details Title, land, improvements, condition, zoning, and photographs (inspected valuations only) Asset details; facts and assumptions
7 Market commentary Market conditions at the valuation date, using only information known or reasonably foreseeable then Avoiding reliance on information from after the valuation date
8 Sales evidence Comparable sales with dates, prices, adjustments and the reasons for them Records sufficient for the valuation to be replicated; avoiding poor comparables
9 Method and cross-check The main valuation method and a second, cross-check method, with reasons Approach and method, with a secondary or cross-check method where possible
10 Valuation A single figure, and why it was chosen within any range considered A specific value, with the choice within a range explained
11 Previous values Where known, an explanation of material differences from the purchase price or earlier valuations Explanation of material differences from historical cost and prior valuations
12 Assumptions, risks and disclaimers Any special assumptions and the limits on reliance Risks and disclaimers
13 Valuer's declaration Name, API membership class and number, state registration or licence where required, an independence and conflicts declaration, and a statement that the fee doesn't depend on the value The valuer's identity, status and qualifications; independence and conflicts declaration
14 Signature Signed by the primary valuer who, for an inspected valuation, inspected the property API Rule 11.2 (inspection by the primary valuer). This row is an API requirement, not an ATO one

Sample layout. Not a real report. No real property, value or valuer is shown.

Why

Why the report is built this way

The ATO publishes the minimum content it expects in a market valuation report used for tax. Laying our reports out against that list is how we can say each one is prepared by a qualified, independent valuer in line with the ATO's published market valuation guidance. It is not an ATO approval: no such status exists, and the ATO can review any valuation.

The ATO has not yet published valuation guidance specific to the 1 July 2027 change. It said on 19 October 2026 that it will cover the types of professionals to consider, how to value certain assets and the records needed. If that guidance changes what a report for the reset should contain, we will update the layout and this page.

Where the ATO's guidance stands

Questions

Questions about the report

What should a valuation report for tax include?

At a minimum, the ATO expects the purpose and tax provision, scope, asset details, information and assumptions relied on, standards applied, valuation date (flagged if retrospective), any inspection date, the definition of value, method and cross-check, records to replicate the work, a single value, engagement terms, the valuer's identity and qualifications, an independence declaration and the issue date.

Does the report say it is retrospective?

Yes, whenever the valuation date is earlier than the date the report is prepared. The ATO expects a report to say whether it is a retrospective valuation and to rely only on information known or reasonably foreseeable at the valuation date. A valuation for the 1 July 2027 change is always retrospective, because it is prepared after that date.

Will my accountant get a copy?

Only if you ask us to. When you order or reserve, you can tick a box to send a copy to your accountant and give their email. We don't share reports with anyone without your consent.

Order a report or reserve for 1 July 2027

The report card on this page is a sample layout. Every real report follows the same sections, completed and signed by the valuer.